The digital tuner DreamBox DM 800 HD PVR

DreamBox DM 800 HD PVR is one of the best receivers for reception of channels in high definition (HDTV) that run under the Linux operating system. Dreambox 800 HD PVR inherited its design from the 600 model, and now it can rightly be called the smallest among HD receivers that support the recording function.
Despite its small dimensions, Dreambox 800 HD PVR equipped with a multifunction display has a card reader, which works with almost all the original cards. Also the manufacturer has managed to accommodate a Dreambox 800 HD full set of connectors on the rear panel of the device: RS232 - to change the software, Ethernet to connect to a computer network, e-SATA you can connect an external hard drive that supports hot swap, DVI - used to connect to the plasma and TFT TVs, two USB port support USB devices version 2.0, SCART, digital optical audio out SP/DIF and the modem. And there is no limit to the receiver, you can install a 2.5” HDD with SATA interface. Used in Dreambox 800 HD PVR tuner allows you to receive satellite in DVB-S and DVB-S2 standards. It should also be focus on the excellent sensitivity of the tuner company ALPS, which are made in Japan. Thanks to the modular system connect tuner receiver Dreambox 800 HD without any problems it will be possible in the future to replace DVB-C or DVB-T tuner. Now there is no need to choose a hard drive with a specific interface to use digital video recorder. Dreambox 800 HD PVR will work with HDD connected via any of the three interfaces is SATA, e-SATA and USB. The presence of images of various drivers for the USB ports will not only allow you to connect external drives, but also has the ability to install a variety of devices, such as Wi-Fi USB adapter. In the absence of specific drivers, you can add them to your receiver Dreambox 800 HD. When you connect the Dreambox 800 HD PVR to the network can be used numerous functions to update the software from the Internet, to broadcast streaming video, to communicate with remote cards to work with satellite Internet and many others. Receiver specifications: - 300 Mhz MIPS processor - LINUX operating system - MPEG-2 / H264 hardware decoding - DVI video output - Removable receiving module ( Plug and Play ) - High-contrast OLED display - 64 Mb FLASH, 256 Mb RAM - SATA internal 2.5" HDD), an external E-SATA interface - 10/100 Mbit network interface - 2 x USB 2.0 port - V. 24/ RS-232 port - SCART - S/PDIF optical output - Unlimited list of TV and RADIO channels - Switching time < 1 second - Supports EPG - Automatic channel search - Teletext support - Supports all versions of DiSEqc - Multi-lingual menu ( century. including English) - Supports Skin Equipment: Receiver DM 800 HD PVR - Power supply 12V 3A - Remote control - DVI - HDMI cable, providing the transmission of sound - SATA cable to connect the HDD - SCART adapter-tulips User guide.

www.repiter.mobi